banner home





























The cabinet is made from high-density MDF using Diapason`s tried and tested assembly technology developed from years of building the Astera, Adamantes and Karis models.
A special GRP covering layer is then applied to give the loudspeaker long-term solidity as well as an improvement in sonic performance.
Italian Master Craftsmen - specialists in luxury finishing - then give the final touch to Dynamis by applying whatever colour or material that your imagination may suggest, to create in any listening environment a strong and original appearance statement.

Tradition and innovation blend together in harmony in the choice of technology for the drivers.

A large magnet system on paper Nextel coated midrange driver is used in order to have a very long coil excursion with very low distortion and an excellent transient response. Midrange is matched with an extraordinary silk soft dome tweeter provided by large magnetic flow; woofer completes the frequencies range giving a solid performance , impressive deep and controlled bass range performance.

The cross-over uses finest quality components and is built and wired entirely by hand in order to exclude any possibility of loss or phase rotation, and to ensure excellent dynamics under all conditions.
The quest for perfection is inherent in this loudspeaker and evident in the care taken with every detail.

The elegant connectors made by Diapason guarantee perfect contact with any system of cabling; the plinth is supplied with anti-scratch swivelling castors to make room placement easy, as too for the lower reflex port. The front baffle slope has been designed to allow pefect alignment of the drive units. The drivers are individually protected by a fixed, acoustically transparent grille which is attached to the loudspeaker by means of magnets, and which also enhances the beauty of the Dynamis design.




Frequency response
24/20.000 Hz  (+/- 3 dB)

Tweeter Ø
29 mm  silk soft dome

Midrange: Ø 18 cm  paper cone Nextel coated

Woofer Ø
30 cm  Alu cone  Fiber glass dust cup  
89 dB/W/m

Freq. crossover
4.600 Hz

Nominal impedancee
4 Ohm

Min impedance
3,4 Ohm/200 Hz

Download product details



metallic bronze, glossy white, dark grey, China red, metallic silver or other colour on demand

Weight per speaker
100 Kg  

Dimensions speaker
45 x 68.50 x 127.50 


©2011 Sound Center di Schiavi A. e C. snc - P.IVA: IT02588970984 - via Fura 40, 25125 Brescia - Italy - tel. +39.030.3701234 -